Showing posts with label Skystream windturbine. Show all posts
Showing posts with label Skystream windturbine. Show all posts

Tuesday, September 4, 2007

Skystream Windturbine/ Sanyo Solar Panels Generating

This is our hybrid (wind/solar) system in action!

Monday, September 3, 2007

55 ft Skystream in action

Here is a video of the Skystream in action.

Sunday, September 2, 2007

Lifting the tower.




Sterling, my youngest son came to help us raise the tower. The gin pole is connected to the opposite side of the tower base from the hinge. The gin pole is 20 feet long and weights approximately 300 lbs. The gin pole is secured to the tower base with 3 bolts and has a cable that connects to the other end. The cable is connected to the tower at about 15 feet from the top of the tower. This cable will off set the stress of the pull from the winch at the base. The gin pole has a second cable that runs down to the pulling source. I connected this end to my winch on my Jeep. For extra stablity I put 8x8 timbers in front of my wheels. The 9500lb winch had no problem pulling up the tower. Sterling is shown here watching, to make sure the foundation holes line up with the bolts, so we don't damage the bolt threads. Rena is on the winch, and watching the tower so it is going up safely. I am maning the gin pole and waiting for the tower to get to the balance point so I can slowly lower the foundation base over the bolts. Debbie, our friend is documenting the raising with pictures and video. We had some difficulty with getting the gin pole securing bolts to clear the washers and nuts. We got the middle bolts on first. Then the gin pole was loosened and the bolts where placed on those bolts. We had to loosen the hinge plate slowly and lower the hinge side of the foundation base to get the bolts placed on the last three bolts. The tower was then leveled with small torpedo levels on the base. Then later, we readjusted for level after watching the turbine head.














There was no wind that day so the only rotation of the Skystream was when a bird landed on the blade and it's weight made the blade turn. The first of these three picture shows the windturbine from the back yard and the second is a view from the front road. It shows our hybrid system of the solar and wind.


















Tuesday, July 3, 2007

Upgrades on the Skystream complete


This is the Skystream windturbine being upgraded with new softwear and testing the radio frequency remote. It will set approximately 50.6 feet in the air so we are hoping all the upgrades are done and we won't have to bring the tower down to do any work on it for at least a year. We plan to purchase a radio frequency monitoring device later to track our energy production. The sky stream information can be found at: http://www.skystreamenergy.com/skystream/

Here are the
Technical Specifications
Model: Skystream 3.7
Rated Capacity: 1.8 kW; 2.4 kW peak
Weight: 170 lbs / 77 kg
Rotor Diameter: 12 ft / 3.72 m Swept Area: 115.7 ft2 / 10.87 m2
Type: Downwind rotor with stall regulation control
Direction of Rotation: Clockwise looking upwind
Blade Material: Fiberglass reinforced composite Number of Blades: 3
Rated Speed: 50-325 rpm Tip Speed: 66-213 ft/s / 9.7-63 m/s
Alternator: Slotless permanent magnet brushless Yaw Control: Passive
Grid Feeding: Southwest Windpower inverter 120/240 VAC 50-60 Hz
Braking System: Electronic stall regulation with redundant relay switch control
Cut-in Wind Speed: 8 mph / 3.5 m/s Rated Wind Speed: 20 mph / 9 m/s
User Control: Wireless 2-way interface remote system
Survival Wind Speed: 140 mph / 63 m/s Sound: 45 decibels @ 40 ft / 12 m.


The True performance of the wind turbine doesn't really take off till it wind speed gets around about 15- 20 mph were it then generates the 2.4 kwh.